Lindy 32354 - Manual (Page 66)

LINDY CPU Switch Dual Multi-Platform Installation and Use Page 65
characters represent the firmware release version (e.g. 129 equals version 1.29).
3) A data file that tells the upgrade program (LYDMP.EXE) which binary code files
(HEX files) to download to the LINDY CPU Switch Dual MP and where to put each
file. Theoretically this DAT file can be modified so that only certain processors are
upgraded but do not do this unless specifically instructed by LINDY technical
support.
e.g. M216V129.DAT
Like the hex files, the first three numeric digits represent the model number (e.g. 216
represents an LINDY CPU Switch Dual MP model 32354 with 16 computer ports).
The next four digits represent the version number (e.g. V129 equals firmware version
1.29).
To upgrade the LINDY CPU Switch, check that the DAT file designation matches the
model that you have. In other words, if you have an LINDY CPU Switch Dual MP with
16 computer ports and you want to upgrade to version 1.30 then the DAT file that
you need would be named M216V130.DAT. Also check that all the required files are
loaded into the same directory on your computer. From that directory run the upgrade
file using the following command line.
LYDMP {Dat_file_name}. DAT
Where {Dat_file_name} is the name of the required DAT file
For example, if the name of the required DAT file is 216V129.DAT then use the
following command line:
LYDMP M216V129.DAT