Pecifications – Life Fitness M051-00K62-B095 User Manual

Page 50

Advertising
background image

49

7

S

PECIFICATIONS

7.1

L

IFE

F

ITNESS

95X

E

F

IT

S

TRIDE

TM

T

OTAL

B

ODY

T

RAINER

Designed use:

Heavy/Commercial

Maximum user weight:

350 pounds / 160 kilograms

Power Requirements:

Refer to Section 1.3 - Setup, Electrical Power Requirements

Upper Touchscreen:

12.1 in. Diagonal, 800 x 600 TFT LCD

Channel coverage:

VHF: 2-13/UHF: 14-69/CATV: 1-125

Antenna:

75-ohm external antenna terminal for VHF/UHF
(>43dBuV (@75ohm) or > 65.8dBm)

Headphone Jack:

300 milliwatt, 3.5mm Stereo

Broadcast Capabilities:

NTSC tuner supports NTSC-Japan, NTSC-HRC, NTSC-M, PAL-M and PAL-N.
PAL/SECAM tuner supports PAL B/G, PAL-I, PAL-D/K, SECAM-L and SECAM-D/K.

Control Panel:

Arrow keys, screen lock and unlock, Cooldown, Quick Start, and TV controls.

Screens:

Workout Selection, Workout Setup and Workout Progress Screens

Information Displayed:

Distance, Mode (Aerobics or Reverse), Calories, CAL/HR, *Watts, METs, Elapsed
Time (or Remaining Time, or Hidden Time), Time in Zone, Level, Speed, and Target
Heart Rate (for heart workouts), TV (on, zoom).

Summaries:

Total elapsed time of workout, total calories burned, total distance, and time in zone
(when applicable.)

Workouts:

Quick Start, Fat Burn, Manual, Random, Cardio, and Hill. Zone Training including:
Heart Rate Hill, Heart Rate Interval, and Heart Rate Extreme. Hill Plus including:
Around the World, Foothills, Kilimanjaro, Interval, Cascades, Speed Training and
Custom Workouts. Personal Trainer including: Cross-Train Aerobics, Cross-Train
Reverse, and Life Fitness Fit Test.

Heart rate monitor:

Lifepulse system sensors and Polar

®

telemetry heart rate monitoring system Polar

®

heart rate chest strap: optional

Resistance Levels:

26 (0 to 25, speed-independent)

Pedal speed range:

1.5 mph-14.3 mph (2.4 km/h-23.0 km/h)

Drive type:

Belt/alternator

Accessory Tray:

Standard

Integrated Reading Rack: Standard

Color:

Silver with gray accents

Ports (1):

Type RJ45 Network ready connection

CATV (1):

F-type connector

Physical Dimensions:

Shipping Dimensions:

Length:

84.75 inches / 215 centimeters

Length:

85.75 inches / 217.8 centimeters

Width:

26.5 inches / 67 centimeters

Width:

29.75 inches / 75.6 centimeters

Height:

64 inches / 162.5 centimeters

Height:

50.75 inches / 128.9 centimeters

Weight:

286 pounds / 130 kilograms

Weight:

390 pounds / 176.9 kilograms

For EN 957-9 class A accuracy testing, input mechanical power was measured by connecting a cross-trainer to a fixture consisting of a motor and gear
box with an attached torque transducer, amplifier, and readout display. Testing was done by removing the pedal lever from one side of the cross trainer
and connecting the test fixture in place of the pedal lever at the crank axis. Torque measurements were taken with and without the pedal lever installed
on the other side of the cross-trainer in order to determine the level of measured torque required to compensate for the missing pedal lever. From mea-
sured torque and speed, the input mechanical power and variance from displayed power were calculated. At level 12 and a constant 65 RPM, displayed
wattage was 133 watts, with a 4.69% variance from input power on the test equipment. At level 12 and a constant 75 RPM, displayed wattage was 133
watts, with a 4.07% variance from input power on the test equipment.

Advertising