Lowrance electronic 5200C - Manual (Page 104)

98
The last field in this menu is
C
ONFIG
DST
. This feature allows your unit
to automatically adjust with the time change caused by Daylight Sav-
ing Time. You should only have to set it once.
You may select which set of rules matches DST in your region, or ac-
cept the default. Once you have each field set the way you want, press
EXIT
repeatedly until you return to the previous page.
Show WAAS Alarm
When the signal is available, the unit will automatically use WAAS to
boost the accuracy of your position fix. When the WAAS signal is lost or
acquired, an alarm message appears. It's not unusual for a GPS/WAAS
receiver to frequently lose and reacquire its lock on a WAAS satellite.
That can result in the alarm repeatedly going on and off. If you want,
you have the option of turning off the WAAS Acquired/Lost alarm
without affecting how the unit uses WAAS. Here's how:
1. Press
MENU
|
MENU
| ↓ to
GPS S
ETUP
|
ENT
| ↓ to
S
HOW
WAAS A
LARM
.
2. With the option highlighted, press
ENT
to uncheck it (turn off) and
check it (turn on.) After the option is set, press
EXIT
|
EXIT
to return to
the page display.
3. You can return to this command and press
ENT
again to turn the fea-
ture on.
Software Version Information
From time to time, Lowrance updates the operating system software in
some of its products. These software upgrades are usually offered to
customers as free downloads from our web site,
www.lowrance.com
.
These upgrades make the unit perform better or introduce a new fea-
ture or function. You can find out what software version is running in
your unit by using the Software Information command.
1. Press
MENU
|
MENU
| ↓ to
S
YSTEM
S
ETUP
|
ENT
| ↓ to
S
OFTWARE
I
NFO
|
ENT
.
2. Read the information displayed on the screen.
3. To return to the last page displayed, press
EXIT
|
EXIT
|
EXIT
.
Sounds and Alarm Sound Styles
Sounds triggered by key strokes and alarms can be adjusted:
You first press
MENU
|
MENU
| ↓ to
S
OUNDS
|
ENT
.