Land Pride 313-308M User Manual
Page 14
12
Section 2: Assembly & Set-Up (Optional)
PS2096 Series Primary Seeders 313-308M
6/15/10
Small Seeds Drive Assembly
Refer to Figure 1-8:
1.
Place decal “Danger Guard Missing” (#17),
“Danger Moving Parts” (#18) and “Seed Rate
Chart” (#19) in locations shown (beneath lid).
2.
Assemble chain guard mounts (#5) with the 1/4”
flange bolts (#7) and flange nuts (#10). Do not tighten
until the complete drive has been assembled and the
chain guard (#15) installs properly. The chain guard
mounts are slotted for easier chain guard mounting.
3.
Install chain idler with welded on spacer (#2) and
chain idler (#3) with 1/2” nut (#8).
4.
Assemble the spacer (#4) and reduction sprocket
assembly (#6) to the 5/8” welded on bolt with the 5/8”
lockwasher (#11) and nut (#9).
5.
Assemble the front roller sprocket (#12) and key (#1)
to the front roller shaft.
6.
Install chain (#14) first and then chain (#13).
7.
Assemble chain guard (#15) with knobs (#16).
Position chain guard mounts (#5) where needed and
tighten hardware.
20608
Small Seeds Drive Assembly
Figure 1-8