Land Pride 313-308M - Manual (Page 31)

29
Section 8: Troubleshooting
6/15/10 PS2096 Series Primary Seeders 313-308M
Table of Contents
Section 8: Troubleshooting
Problem Solution
Uneven seed spacing or uneven
stand. Check for plugging in seed cup.
Reduce ground speed.
Check for trash or mud build up on rollers.
Actual seeding rate is different than
desired. Seed treatment will affect seeding rate if the chemicals build up in seed cup.
Unless cleaned regularly, this build up can cause breakage of the seed cup
shaft.
Feed cup sprocket locked up or
twisted feed cup drive shaft. Check for foreign matter lodged in seed cup sprocket.
Rollers not turning freely. Check for trash or mud build-up on roller end.