Linksys BUSINESS SPA922 - Manual (Page 137)

Linksys SPA9x2 Phone Administration Guide
Cisco Confidential--First Draft
130
SIP Tab
SPA9x2 Phone Field Reference
VLAN Settings
SIP Tab
This section describes the fields for the following headings on the SIP tab:
• SIP Parameters, page -130
• SIP Timer Values (sec), page -133
• Response Status Code Handling, page -134
• RTP Parameters, page -135
• SDP Payload Types, page -137
• NAT Support Parameters, page -139
• Linksys Key System Parameters, page -140
SIP Parameters
Secondary NTP Server IP address or name of secondary NTP server.
Parameter Description
Enable VLAN Enable this parameter if the switch to which the Linksys
IP phone is connected uses VLAN tagging.
VLAN ID Enter the VLAN tag for the VLAN to which the Linksys IP
phone is assigned. This should be the same VLAN to
which the SPA9000 is assigned.
Enable CDP Enables or disables Cisco Discovery Protocol (CDP).
Defaults to Yes.
Parameter Description
Max Forward SIP Max Forward value, which can range from 1 to 255.
Defaults to 70.
Parameter Description