Linksys BUSINESS SPA922 - Manual (Page 32)

Linksys SPA9x2 Administration Guide 25
Roadmap to Web UI Features
Getting Started
Roadmap to Web UI Features
The following tables provide a roadmap to features available on the web UI.
To perform these tasks... On the web UI, click the ...
View phone phone, extension, and line/call information
such, including:
• DHCP, current IP address, DNS addresses
• software and hardware versions
• broadcast, RTP, and SIP information
• registration state
• packets sent, received, lost, and so on
Info tab
See ”Obtaining Phone Information
(Info Tab)” section on page 27 .
Configure system-level parameters, including network and
debug parameters. To:
• enable the web UI and web administrator access
• set the Internet connection type to DHCP
• configure the syslog and debug servers
• enable VLAN and CDP
System tab
See Chapter 3, "Setting System
Features."
Configure parameters to adjust SIP stack and protocols. To
enable:
•
CTI
• SIP-B
• STUN
SIP tab
See Chapter 4, "Setting SIP
Parameters."