Linksys BUSINESS SPA922 - Manual (Page 52)

Linksys SPA9x2 Phone Administration Guide 45
SIP Parameters
Setting SIP Parameters 4
Setting SIP Parameters
Use the SIP tab to set SIP, RTP, SDP, NAT and Linksys key system parameters. This chapter
discusses:
• ”SIP Parameters” section on page 45
• ”SIP Timer Values” section on page 48
• ”Response Status Code Handling” section on page 50
• ”RTP Parameters” section on page 51
• ”SDP Payload Types” section on page 52
• ”SDP Payload Parameters” section on page 52
• ”NAT Support Parameters” section on page 52
• ”Linksys Key System Parameters” section on page 53
SIP Parameters
Use this section to configure various SIP parameters, including enabling CTI.