La Crosse Technology WS-7215U-IT - Manual (Page 6)

6
A. REMOTE TEMPERATURE SENSOR
1. Remove the mounting bracket. The
bracket snaps on and off easily.
2. Remove the battery cover, by sliding the
cover down.
3. Observing the correct polarity install 2 AA
batteries. The batteries will fit tightly (to
avoid start-up problems make sure they do
not spring free).
4. Replace the battery cover by sliding upwards. Be sure battery
cover is on securely.
B. WIRELESS TEMPERATURE STATION
1. Remove the battery cover. To do this, insert a solid object in
the space provided at the lower-central position of the battery
cover, then push up and pull out on the battery cover.
2. Observe the correct polarity, and install 2 AA batteries.
3. Replace the battery cover.
* When the signal is successfully received by the Wireless Temperature
Station, the icon will be switched on. (If not successful, the icon will not be
shown in LCD) So the user can easily see whether the last reception was
Battery
Cover
Battery
cover
Sensor signal
reception icon*