LG 47VL10 - Manual (Page 8)

8
ENG
ENGLISH
ASSEMBLING AND PREPARING
y Do not use the cable management as a
handle for the Monitor.
y The illustrations in this manual may differ
from actual cable interfaces.
Cable Management
- Only on some models.
1 Arrange the cables in the center as shown in
the following picture.
2 Fit the cable management to the back to help
manage the cables.
3 For removing the cable management, hold the
Cable management with both hands and pull it
downward.
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit
http://www.kensington.com.
Connect the Kensington security system cable
between the Monitor set and a table.
y The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
NOTE
NOTE