Lindy 39405 - Manual (Page 43)

Mouse Speed
ƒ
Auto mouse speed Use this option if the mouse settings on the host use an additional
acceleration setting. The IP ACCESS SWITCH LITE tries to detect the acceleration and
speed of the mouse during the mouse sync process.
ƒ Fixed mouse speed Use a direct translation of mouse movements between the local and
the remote pointer.
You may also set a fixed scaling which determines the amount the remote mouse pointer is
moved when the local mouse pointer is moved by one pixel. This option only works when the
mouse settings on the host are linear. This means that there is no mouse acceleration involved.
To set the options, click on the Apply button.
5.4.3 Video
Miscellaneous Video Settings
Noise filter
This option defines how the IP ACCESS SWITCH LITE reacts to small changes in the video
input signal. A large filter setting needs less network traffic and leads to a faster video display,
but small changes in some display regions may not be recognized immediately. A small filter
displays all changes instantly but may lead to a constant amount of network traffic even if the
display content is not really changing (depending on the quality of the video input signal). All in
all the default setting should be suitable for most situations.
Force Composite Sync (Required for Sun Computers)
To support signal transmission from a Sun machine, enable this option. If not enabled the
picture of the remote console will not be visible. To set the options, click Apply.
39