Lindy 39405 - Manual (Page 60)

5.6.4 Unit Reset
This section allows you to reset specific parts of the device. This involves the keyboard and
mouse, the video engine and the IP ACCESS SWITCH LITE itself.
Resetting the unit itself is mainly needed to activate a newly updated firmware. It will close all
current connections to the administration console and to the Remote Console.
The whole process will take about half a minute. Resetting sub devices (e.g. the video engine)
will take a few seconds only and does not result in connections closing. To reset individual IP
ACCESS SWITCH LITE functionality, click on the Reset button.
Note: Only the super user is allowed to reset the IP ACCESS SWITCH LITE.
56