Fuser, Fuser -26 – Lexmark 4059-XXX User Manual
Page 189
Advertising
Repair Information
4-26
4059-XXX
Caution: Be sure the fuser assembly has cooled before working
on any of the fuser FRUs.
Note: You must replace cable ties (B) if removed during the fuser
removals. The cable ties prevent the fuser wiring from obstructing
the paper path through the fuser assembly.
Fuser
1. Remove the redrive assembly.
2. Remove the two fuser mounting screws (A).
3. Remove the fuser ground wire and remove the fuser assembly.
Advertising