Life Fitness Fit-1 - Manual (Page 22)

22
FIGURE 32
STEP 32:
73
78
62 3/8 X 1-3/4” (43m)
38
76
75
• Route the LEG CABLE (45) around one 4-1/2” PULLEY (38) and assemble the PULLEY (38) to the lower holes of the two
DUAL PULLEY PLATES (21) using two RH CAPS (78), one 3/8 X 1-3/4” BOLT (62), two 3/8” SAE WASHERS (75), two 3/8”
RH WASHERS (76) and one 3/8” LOW HEIGHT LOCK NUT (73) as shown in FIGURE 32.
21
45
78
76
38
73
62
• Route the LEG CABLE (45) around a 4-1/2” PULLEY (38) and assemble it to the bracket on the BASE (1) using four RH CAPS
(78), two 3/8 X 1-3/4” BOLTS (62), four 3/8” SAE WASHERS (75), four 3/8” RH WASHERS (76) and two 3/8” LOW HEIGHT
LOCK NUTS (73) as shown in FIGURE 32.
3/8 X 1-3/4”
1
75
(43m)
0
1
1/2 1/2 1/2 1/2 1/2 1/2
2 3 4 5 6
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150