Lexmark 30E - Manual (Page 99)

Paper or specialty media misfeeds
These are possible solutions if paper or specialty media misfeeds or skews, or if multiple sheets feed or stick together.
Try one or more of the following:
C
HECK PAPER CONDITION
Use only new, unwrinkled paper.
C
HECK PAPER LOADING
• Load a smaller amount of paper into the printer.
• Load paper with the print side faceup. (If you are not sure which side is the printable side, see the instructions
that came with the paper.)
• Check the loading instructions for your paper or specialty media.
R
EMOVE EACH PAGE AS IT IS PRINTED
A
DJUST THE PAPER GUIDES TO FIT THE LOADED PAPER
Print troubleshooting
• “Poor quality at the edges of the page” on page 99
• “Streaks or lines on printed image” on page 100
• “Print speed is slow” on page 100
• “Computer slows down when printing” on page 101
Poor quality at the edges of the page
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
C
HECK MINIMUM PRINT SETTINGS
Unless you are using the borderless feature, use these minimum print margin settings:
• Left and right margins:
– 6.35 mm (0.25 in.) for letter-size paper
– 3.37 mm (0.133 in.) for all paper sizes except letter
• Top margin: 1.7 mm (0.067 in.)
• Bottom margin: 12.7 mm (0.5 in.)
S
ELECT THE
B
ORDERLESS PRINT FEATURE
For Windows users:
1 With a document or photo open, click File  Print.
2 Click Properties, Preferences, Options, or Setup.
Troubleshooting
99