Lenovo RD240 - Manual (Page 24)

Make SMTP Setting
This page is used to set the source address for sending SMTP e-mail.
Step 1. Enter the IP address for the SMTP mail server.
Step 2. Click Save.
User management
The User List page lists all users including configured users, with network permission. The options included
in this page are used to configure the IPMI users for servers and their permissions.
To add a new user, select a blank row from list and click Add User.
To modify a user, select this user from list and click Modify User to modify the relevant settings.
To delete a user, select this user from list and click Delete User.
Note: The user lenovo and three can not be modified or deleted.
BMC sensor settings
In this page, you can select Direct monitoring on I2C bus to monitor BMC sensor mode directly from
I2C bus and get the BMC sensor address, or select External BMC monitoring to manually set the BMC
I2C bus address.
Note: It is recommended that users should not modify BMC sensor settings.
Date/Time and NTP Server Setting
This page can be used to set the internal real-time clock of Remote Management Module. You can manually
adjust the clock or use the NTP clock server to set the internal clock of Remote Management Module in
accordance with the system clock. Once the Remote Management Module powers down, you need to reset
the clock. To avoid this problem, you can automatically set the internal clock to a NTP time server of
the current UTC time.
Note: The NTP server configuration will be blank if IP auto configuration is configured through either BOOTP
or DHCP in the Network settings, because the BOOTP or DHCP server does not provide the NTP server
information.
Configure SSL Upload
This SSL Upload page can be used to upload SSL certificate and private key in order to get access to
the device in safe mode.
Step 1. Select the required SSL certificate and click the Upload button.
Step 2. Then you will be prompted to confirm the certificate uploading. The system will give you notice
after the success of uploading the certificate. After the SSL certificate is successfully uploaded,
you will be prompted to reboot the system.
Remote Control
The Remote Control page allows you to execute the following remote operation on the server:
• Console Redirection
• Server Power Control
18 ThinkServer RD230 and RD240 Remote Management User Guide