6 if you have powered speakers without an adapter – Lenovo IdeaCentre Q150 User Manual
Page 14
User Guide
speakers, this cable is permanently attached.
b. Connect the adapter cable to the speaker, if necessary. On some speakers, this
cable is permanently attached.
c. Connect the speakers to audio line-out port on the computer.
d. Connect the adapter to the power source.
1.5.6 If you have powered speakers without an adapter:
(This picture is only illustration. It is not necessarily meant to be a true representation of
the speakers.)
a. Connect the cable that runs between the speakers, if necessary. On some
speakers, this cable is permanently attached.
b. Connect the cable to the speaker, if necessary. On some speakers, this cable is
permanently attached.
c. Connect the speakers to the audio line-out port on the computer.
d. Connect the plug to the power source.
Note: Some models are not equipped with external speakers.
1.5.7 Connect any additional devices that you have. Your
computer might not have all the ports/sockets shown.
USB
Use this port to attach a device that requires a USB connection.
31044392_Q150_UG_EN_V1.0.indd 9
2010.4.20 10:46:53 AM