Lenovo 1106 User Manual
Page 42
Advertising
8. Slide the new hard disk drive with the blue bracket into the drive cage until it snaps into position and
align the hard disk drive cage pivot pin with the slot
1
in the upper drive cage. Then, slide the hard disk
drive cage into the chassis. Press down on the metal latch
2
and pivot the hard disk drive cage into
place. Then, slide the drive cage to the front of the server until it snaps into position.
Note: There are two arrows, one on the upper drive cage and one on the hard disk drive cage. The
arrows are aligned when the hard disk drive is in the correct position.
Figure 21. Installing the primary hard disk drive
30
ThinkServer User Guide
Advertising