Line 6 3.7 User Manual
Page 52
Advertising
Line 6 GearBox 3.7 – Driver Panel & Recording
3•8
PODxt devices show only one Record Send (Record 1-2).
The type of signal that is routed to the Record Send 1-2 is determined by the PODxt Signal Routing
option within the Audio Signal Routing menu at the left. Note that this Audio Signal Routing
determines this signal type regardless if GearBox is running or not. (See the
section for more about the options in this menu). PODxt also offers a Monitor Level slider in
this tab as well - you can use this to independently adjust your PODxt monitor signal while recording
(independently of the Send signal level that is being recorded).
Inputs & Recording Tab (TonePort UX8 only - Windows)
Advertising