Lennox International Inc. LEGACY C260 - Manual (Page 7)

7
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Model F (1) G H J M
C260 22”
559mm
14”
356mm
22-1/2”
572mm
5-1/4”
133mm
50-1/2”
1283mm
E260 22”
559mm
14”
356mm
22-1/2”
572mm
5-3/4”
133mm
45”
1143mm
C260 with mantel
and/or side
shields u
22”
559mm
14”
356mm
22-1/2”
572mm
5-1/4”
133mm
38”
965mm
* Reduced clearances may be available for A, B, C and D dimensions
per NFPA 211 - latest edition, Standard for Chimneys, Fireplaces,
Vents and Solid Fuel-Burning Appliances (in Canada CSA B365 -
latest edition). See section on “Reduction of Appliance Clearance
with Specified Forms of Protection.”
** Side view of optional mantel deflector shown.
u Elite™ E260 - Not tested for reduction of clearances
(1)Hearth extension reductions: 2” (51 mm) reduction for 2” (51 mm)
raised hearth. (USA) 16” minimum hearth extension on all stoves
and inserts as measured from the door opening of the unit. (Canada)
18”(450 mm) minimum hearth extension on all stoves and inserts
as measured from the door opening of the unit. Minimum distance
of floor protection to the side = 8” (200 mm). This is measured
from the sides of the door opening in the USA and from the sides
of the insert in Canada.
**
Model *A *B *C *D E(1)
C260 30”
762mm
20”
508mm
20”
508mm
15”
381mm
8”
200mm
E260 23”
584mm
17”
432mm
20”
508mm
15”
381mm
8”
200mm
C260 with mantel
and/or side
shields u
17”
432mm
14-1/2”
368mm
20”
508mm
8”
200mm
8”
200mm
Notes:
• Facing material that projects more than 3/4” (19mm) from the wall
is considered a mantel or side wall.
WARNING: BE ABSOLUTELY SURE THE DISTANCE BETWEEN
THE HEATER AND THE SURFACE OF ANY COMBUSTIBLE CON-
STRUCTION IS NOT LESS THAN SHOWN ON THIS PAGE.
Figure 5
Figure 6
8” Ø
Flue Collar
REqUIRED CLEARANCES
Mantel
Trim
C/E260
Masonry Fireplace
UBC Chapter 37
Depth Min. 14-3/4” (375mm)
Height Min. u 22-3/4” (578mm)
Width Min. 30-1/2” (775mm)
Lintel Max. Depth u 5-1/4” (133mm)
u Without use of adjustable offset box or smoke deflector
Table 1 - Fireplace Sizing
Maximum Mantel Depth = 9” (229mm)
COMBUSTIBLE MANTEL
Top Facing / Trim
Side Facing Material
SIDE W
ALL
C
Insert
D
B
A
E (USA) E (Canada)
Hearth Protection
M
F
G
J
H
6-1/2”
165mm
Hearth Protection