Life Fitness Elliptical Trainer - Manual (Page 12)

4. Insert two (#4) 5" bolts and two (#7) washers into the back-
side of the connector joint on the base frame (B). Connect
with two (#7) washers and two(#6) high profile nylon lock
nuts. Start each bolt, and then tighten with a 9/16" socket
wrench.
5. Tighten all six bolts with a 9/16" socket wrench.
S
TEP
3
1. Connect the upper wire harness (C) to the lower wire harness
(D). Insert connected plugs of the wire harnesses into wiring
hole on upright tube assembly (A).
11