Lexmark 840 Series - Manual (Page 36)

Solution 4
Adjust the paper guide:
• When using media less than 8.5 inches wide
• Against the left edge of the paper or media, making sure it does not buckle
Printer does not feed paper, envelopes, or specialty media
Solution 1
If there is a paper jam, see “Jams and misfeeds troubleshooting” on page 35.
Solution 2
Verify that the specialty media is loaded correctly.
Solution 3
Try loading one page, envelope, or sheet of specialty media at a time.
Solution 4
Make sure the printer is set as the default printer and is not on hold or paused.
1 Click:
• For Windows XP Pro: Start Œ Settings Œ Printers and Faxes.
• For Windows XP Home: Start Œ Control Panel Œ Printers and Faxes.
• For Windows 2000: Start Œ Settings Œ Printers.
• For Windows 98/Me: Start Œ Settings Œ Printers.
2 Double-click the name of your printer.
3 Click Printer.
• Make sure no check mark appears next to Pause Printing.
• Make sure a check mark does appear next to Set As Default.
Banner paper jams
1 Press to turn off the printer.
2 Remove the jammed banner paper from the printer.
To keep a banner print job from jamming:
• Use only the number of sheets needed for the banner.
• Select the following settings to enable the printer to feed paper continuously without jamming:
1 With a document open, click File
Œ
Print.
2 Click Properties, Preferences, Options, or Setup.
3 Select the Paper Setup tab.
4 From the Paper Size area, select Banner.
Troubleshooting
36