Polycom 2490 - Manual (Page 7)

SoundStation2 Avaya User Guide - 7
SoundStation2 Avaya is compatible
with any DEFINITY digital voice port
that supports the 6400, 7400 or 8400
series phones (with the exception of
the CallMaster series.)
Connection Requirement: Requires
standard DEFINITY wall jack. RJ45/
RJ11 adapter cables are included for
your convenience.
System Compatibility
1. Insert the short Network Cable into
the SoundStation2 Avaya Interface
Module jack marked with the Net-
work icon ( ). Plug the other
end into the digital voice jack, as
shown.
► If the connector does not fit, you
will need one of the optional RJ11
to RJ45 Network Cables for con-
nection to the wall jack, and for
your phone should you choose that
option. This cable has a smaller
connector on one end, so try it both
ways.
You have the option to install a
DEFINITY series telephone along with
your SoundStation2 Avaya:
1. Plug the DEFINITY Telephone
cable into the jack on the Interface
Module indicated by the telephone
icon .
► If the connector does not fit you
will need one of the optional
cables as a replacement for your
phone cable. This cable has a
smaller connector on one end, so
try it both ways.
2. Plug the long ‘Console to Interface
Module’ cable into the jack on the
Interface Module labeled with the
icon as shown.
Setting up SoundStation2 Avaya
Any digital phone supported by your
telephone network can be connected to
the phone jack on the Interface Module.