Polycom 2490 - Manual (Page 8)

SoundStation2 Avaya User Guide - 8
Ready State
SoundStation2 Avaya will display a
Ready message upon power up and
completion of initialization.
The Ready message is also shown after a
call is completed and the phone is avail-
able for the next call.
BEREIT
WIEDERW. TEL.BUCH KURZWAHL
5551212
READY
REDIAL PH BOOK SP DIAL
5551212
PREPARADO
RELLAMAR DIR TEL MARC RÁP
5551212
PRÊT
RECOMP ANNUAIRE ABRÉGÉ
5551212
PRONTO
RISEL. RUBRICA N. ABBR.
5551212
KLAR
NY OPPR TLFLISTE HURTIGNR
5551212
PRONTO
REDISCAR LIST TEL DISC RAP
5551212
English
German
Spanish
French
Italian
Norwegian
Portuguese
(Brazilian)
3. Plug the other end into the slot
under the SoundStation2 Console
as illustrated. Then thread the
cable through the channels on the
underside of the console as shown
at right.
4. Plug the Power Adapter Cable
into the Interface Module jack
marked then plug the Power
Adapter into the electrical outlet.
► The first time the SoundStation2
Avaya is powered up and con-
nected to the network through the
Interface Module, it will run a brief
self-test and synchronize itself
with your telephone network. Dur-
ing this time the LEDs will blink.
When the process is complete you
will hear a tone and the LEDs will
switch off. This process can take
20 seconds.
The SoundStation2 Avaya is designed
for greater room coverage with ex-
tended microphones.
► If using the optional extension
microphones, connect to
SoundStation2 as shown at right.
Place the SoundStation2 Avaya on a
flat, stable surface in the center of the
room.
► If using the extended hypercar-
diod microphones, for the best
coverage, position as shown in
the example to the right.
MIC 1
MIC 3 MIC 2
MIC 4 MIC 5