Panasonic DMC-LC70PP - Manual (Page 102)

Playback (advanced)
102
Preparation
• Set the DPOF print with this camera in advance. (P79)
• Set the paper size and print quality with the printer. (Read the printer operating
instructions.)
• Connect the camera to a printer. (P100)
ª DPOF picture
1 Select [DPOF PICTURE].
• Press the [MENU] button, and you
can change the DPOF print setting.
(P79)
• When printing under the new
settings, disconnect the USB
connection cable and connect it to
the printer again.
2 Select [YES] and print.
• Press the [DISPLAY] button to print
the date. (Only when connecting to
the printer supporting to printing
the date.)
• Press the [MENU] button to cancel
printing.
¬Suggestions/Tips ¬
• When the total number of prints becomes 1000 or more, the number of remaining
pictures does not appear on the screen.
• When connecting to a printer not supporting DPOF, DPOF printing cannot be set.
(The DPOF print selecting screen does not appear.)
• Do not disconnect the USB connection cable when the cable disconnection
warning icon [ ] is indicated.
• When the [ ¥] indication lights in yellow during printing, check if there is a
malfunction on the printer.
• If the printer does not support the date printing by DPOF setting, the date may not
be printed as it is on date setting in DPOF setting.
• The setting on the printer may have priority over the setting on the camera in the
date print. Also check the date print setting on the printer.
SINGLE
PICTURE DPOF
PICTURE
SET SELECT
PictBridge
WB WB
DATE DISPLAY
SELECT SET
PLS CHECK THE PRINTER
START PRINTING?
YES NO
PictBridge
WB WB
DMC-LC80.book 102 ページ ２００４年６月１５日 火曜日 午後５時４９分