Panasonic DMC-LC70PP - Manual (Page 104)

Playback (advanced)
104
Preparation
• Set the DPOF print with this camera in advance. (P79)
• Set the paper size and print quality with the printer. (Read the printer operating
instructions.)
• Connect the camera to a printer. (P100)
ª DPOF picture
1 Select [DPOF PICTURE].
• Press the [MENU] button, and you
can change the DPOF print setting.
(P79)
• When printing under the new
settings, disconnect the USB
connection cable and connect it to
the printer again.
2 Select [YES] and print.
• Press the [DISPLAY] button to print
the date.
• Press the [MENU] button to cancel
printing.
¬Suggestions/Tips ¬
• When the total number of prints becomes 255 or more, the number of remaining
pictures does not appear on the screen.
• When you set the date print setting by pressing the [DISPLAY] button, the date is
printed regardless of the date print setting on DPOF setting. (P83)
• If the printer does not support the date printing by DPOF setting, the date may not
be printed as it is on date setting in DPOF setting.
• The setting on the printer may have priority over the setting on the camera in the
date print. Also check the date print setting on the printer.
SET SELECT
DIRECT PRINT
SINGLE
PICTURE DPOF
PICTURE
WB WB
PLS CHECK THE PRINTER
START PRINTING?
DATE DISPLAY
SELECT SET
YES NO
DIRECT PRINT
WB WB
DMC-LC80.book 104 ページ ２００４年６月１５日 火曜日 午後５時４９分