Panasonic SV-PT1PP - Manual (Page 14)

14
Index Of Controls
Front View
SD
HDD
USB S/V OUT DC IN
COPY
TV
MODE
BA
TTER
Y OPEN
OFF ON
HDD SAFETY
Hand Strap
Attachment Pin
Attach hand strap here.
(p. 15)
POWER Lamp
Lights when power is
ON. Flashes during
battery recharge.
SD Lamp
Lights when SD Memory
Card or MultiMediaCard
is accessed.
HDD Lamp
Lights when PC Card
HDD or PC Card is
accessed.
CANCEL Button
Cancels Slide Show and
presentations.
Liquid Crystal Display
The LCD indicates the current operating (TV, Copy) mode.
• In Copy mode, displays battery level, data transfer progress,
and various menus. (pp. 18~23)
• With USB cable connection, displays card selection options.
(p. 44)
Left Side View
HDD SAFETY
(ON/OFF)
Switch
Turns HDD
SAFETY function
ON/OFF. (p. 18)
COPY/TV
MODE Switch
Switches between
Copy and TV
operating mode.
(pp. 19, 24)
Battery
Compartment
Holds the battery.
End View
USB Terminal
By connecting this unit to a
PC with the supplied USB
cable, it can function as an
external drive. (pp. 42~49)
S/V Output Connector
You can use the supplied
video cable to connect this
unit to the S-Video or Video
terminals of a TV to view
images. (p. 24)
DC Input Connector
(Power Supply)
This unit can be supplied
with external power by
connecting the AC adaptor
(supplied) to this connector.
(pp. 16, 24, 42)
HDD SAFETY Detection
Switch
This switch pops out if the unit is
lifted up. In this case, the HDD
and all operations stop.
(p. 18)
Cursor Buttons
( )
Moves the cursor up,
down, left and right.
MENU Button
Displays/Clears menu.
SD Memory Card
Slot
Open to insert/remove SD
Memory Card or
MultiMediaCard. (p. 17)
STANDBY Button
Press this button for
approx. 2 seconds to turn
power ON/OFF.
SET Button
Executes selected
operation.
PC Card HDD (PC
Card) Slot
Slide lever and open
cover to insert/remove
PC Card HDD or PC
Card. (p. 17)
RESET Function
Press CANCEL and
STANDBY simultaneously
for 5 seconds to reset unit.
(p. 52)
Connector Cover
Protects the
connectors.
PT1.p14-18.p65 2003/01/14, 12:36 14