Panasonic SV-PT1PP - Manual (Page 21)

21
Copy Mode
Copy Mode (Copying)
1
Display the Copy menu. (p. 19)
• Press MENU to display the menu. (p. 20)
2
Press to select the desired
menu item, then press SET.
All the data can be copied from a Memory Card to the PC Card HDD (PC Card) in a
single operation. Also, data within specific folders can be copied from the PC Card
HDD (PC Card) to a Memory Card by selecting the desired folders to be copied.
Be sure both a PC Card HDD (PC Card) and a Memory Card are inserted.
If “HDD -> SD”, press ,
then SET to select a folder.
Copying will be performed.
• Refer to “Copying and Backup”
(pp. 11, 12) for data copy details.
• If existing data is to be
overwritten, the message at right
appears. To overwrite, press SET.
To cancel, press CANCEL.
Example: SD -> HDD
Copy completed!
• Press any button redisplays Copy
menu in Step 1.
• If “SD -> HDD” has been
selected, a “CARD****”
folder will be created on the
HDD, and the data will be
copied into that folder. If a
card other than a PC Card
HDD is inserted, copy will be
done in the folder structure
of the Memory Card used.
• When copying from HDD ->
SD, only the “CARD****”
folder on the HDD can be
copied.
• When unit is on battery
power only, not pressing a
button for 10 seconds
changes display to show
battery life remaining. Press
SET to resume previous
operation.
• Copying cannot be done if
Memory card is write-
protected.
• Secure data (including files
with WMA, SA1 and MP3
extensions) will not be
copied.
• If copy is canceled in
progress, data copied to
that point will remain on the
destination card. If this data
is unwanted, select TV or
PC mode and delete it.
– Note –
• Never remove a card from
the unit while copying is in
progress.
(When a PC Card HDD and SD
Memory Card are inserted)
3
Press to select “YES”, then
press SET.
• After menu selection is made, card
capacity is checked. If “NO
CAPACITY” is displayed, Copy menu
will reappear. Replace card with one
containing sufficient space, then
repeat these steps from the
beginning.
To cancel copy in progress:
1. Press CANCEL.
2. Press to select “YES” then
press SET to execute.
Caution
PT1.p19-23.p65 2003/01/14, 12:36 21