For your information, Warning and instruction displays – Panasonic SV-PT1PP User Manual

Page 50

Advertising
background image

50

Warning and Instruction Displays

Indications

Condition

Copy Mode (Liquid Crystal Display)

Insert battery. Power will not turn on without battery
inserted.

Insert the card.

No data is stored on the card.

An error has occurred during initialization of the
HDD/PC Card. Turn off the power, then reinsert the
card. If error occurs again, format the card (p. 23),
then reinsert it. If error still occurs, card may be
damaged.

An error occurred during card formatting.
Re-insert card and format again. (pp. 22, 23)

Insufficient free space on the copy destination disk.
Delete unnecessary files, or insert a card with
sufficient free space.

The card is protected. Cancel the protection to
resume operation. Refer to documentation provided
with the card.

An error occurred during copying. Press any key,
then reset the unit (p. 52), or turn the power off,
then back on again and repeat copying operation.

The HDD SAFETY Detection Switch has activated
and the HDD has stopped for protection. Place the
unit on a flat, level surface.

SD Memory Cards formatted to FAT32 specifications
cannot be used. “Format?” will be displayed. Transfer
desired files to PC, then format the card. (pp. 22, 23)

Secure data files (audio files that include copyright
restrictions) cannot be copied.

The battery is spent. Copy operation will stop and
power will turn off. Recharge the battery.

The battery is spent. The copy operation will be
canceled and the power will turn off. Then recharge
the battery.

The PC Card cannot be formatted.

PLEASE

INSERT BATT.

NO CARD

NO DATA

NO CAPACITY

CARD PROTECT

COPY ERROR

HIT ANY KEY

SAFETY MODE

PUT IT DOWN

INIT ERROR

FORMAT ERROR

CAN’T USE

FAT32 SDCARD

CAN’T COPY

SECURE FILES

BATTERY LOW

COPY CANCEL

BATTERY LOW

PC CARD

CAN’T FORMAT

PT1.p50-56.p65

2003/01/14, 12:37

50

Advertising