Polycom TransTalk 9000-Series - Manual (Page 137)

Automatic System Answer Button (#111)—Release 2.0
or Later
5-27
If you want to assign Automatic System Answer to a specific button,
press
3 . A display similar to the following appears:
ASA Button
3 Select a Button
Then press a programmable button with lights to assign Automatic System
Answer to that button.
3. Select another procedure or exit programming mode.
4. Label the Automatic System Answer button at extension 10.
Using
To turn Automatic System Answer on:
Press the Automatic System Answer button at extension 10.
The green light is on steady and Automatic System Answer is on. If calls
are ringing when Automatic System Answer is turned on, the calls will be
answered immediately by the system.
To turn Automatic System Answer off:
Press the Automatic System Answer button at extension 10.
The green light goes off and Automatic System Answer is off. Any calls in
the process of being answered by the system will continue to hear the
recorded message and will be placed on hold.