Polycom TransTalk 9000-Series - Manual (Page 139)

Automatic System Answer Delay (#110)—Release 2.0
or Later
5-29
Valid Entries
0–9 (0 rings = answered immediately)
2
✔
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and on system phones.)
To change the number of times an incoming call rings at extension 10 before the
system answers it:
1. Press f 0 0 s s # 1 1 0 .
2. To change the number of rings, press D until the appropriate value
displays—see “Valid Entries” above.
3. Select another procedure or exit programming mode.