Polycom TransTalk 9000-Series - Manual (Page 167)

Call Pickup (I6XX)
5-57
Call Pickup (I6XX)
Description
This feature lets users answer any intercom, outside, or transferred call ringing at
another specified extension (where XX is a system extension number). This
feature is useful for officemates who agree to answer each other’s calls.
Related Features
Use this feature to retrieve a parked call—see Call Park. Note that if you use Call
Pickup to answer a call that is parked at an extension that also has ringing calls,
you will be connected to the parked call—parked calls take precedence over
ringing calls.
Considerations
You can program a Call Pickup button on a system phone to pick up with one
touch a call that is ringing or parked at another specified extension.
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a Call Pickup button:
1. Press f 0 0 s s c at extension
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. To specify the extension to be answered, press left i , followed by 6
and the two-digit system extension number. For example, to answer a call
ringing at extension 23, press left
i 6 2 3 .
5. Program another button for this extension or exit programming mode.
Using
System Phone
1. If you want, lift the handset.
2. Press the programmed button, or press i 6 and the two-digit
number of the extension at which the call is ringing or parked.