Polycom TransTalk 9000-Series - Manual (Page 21)

Overview
1-6
Configurations
The system can have one of three basic configurations, all of which must be
wall-mounted:
■ Stand-alone PARTNER ACS processor module. This configuration does
not use a carrier.
■
2-Slot Carrier, which can hold up to two modules. The PARTNER ACS
processor module resides in the leftmost slot.
■
5-Slot Carrier, which can hold up to five modules. The PARTNER ACS
processor module resides in the center slot. This carrier includes a cover.
In either carrier, one and only one of the modules must be a PARTNER ACS
processor module. The modules slide into the carrier, which channels power to
the system.
System Modules
The following system modules can be installed in your system:
■ PARTNER ACS Processor Module provides the software intelligence that
controls the system’s features. It has jacks for three outside lines, eight
enhanced Tip/Ring extensions, a music-on-hold audio source, a
loudspeaker paging system, a grounding screw, a jack that supports an
adjunct for two Contact Closures, and a call reporting (SMDR) device, such
as a printer. It also has two PC Card slots, a bicolor red and green
light-emitting diode (LED), and two AAA user-replaceable batteries. The
module also provides support for integrated Caller ID information on
system display phones. The system requires one PARTNER ACS
processor module.
■
200 Module has two outside line jacks, but no extension jacks. This
module is an inexpensive way to add lines when you do not need more
extensions.
■ 206E Module has jacks to connect a maximum of two outside telephone
lines and six extensions to the system. You can connect telephones and
other telecommunications devices (such as fax machines and modems) to
the extension jacks (either directly or through your building’s modular wall
jacks). Each 206E module has a green power indicator that shows it is
receiving power.
■
400E Module is similar to the 206E module but without extension jacks. It
has four outside line jacks. Like the 200 module, this module is an
inexpensive way to add lines when you do not need more extensions.