Polycom TransTalk 9000-Series - Manual (Page 227)

Display
5-117
Display
Description
PARTNER-model display phones have a 2-line, 24-character (per line) adjustable
display area for calling and programming feedback. Specifically, the display
shows:
■ Current date (excluding year), day, and time when the phone is idle
■ Account code, as it is entered
■
Number dialed when making a call
■
Duration of call (call timer)
■
Number (and name if programmed) of the extension calling when receiving
an intercom call or transferred call
■ Number (and name if programmed) of the extension returning a transferred
call when no one answers at the destination extension
■ Automated Attendant, Voice Messaging System, or Direct Extension Dial
when a call is transferred from an auto attendant, a voice messaging
system, or the Direct Extension Dial feature, respectively. Transfer from
Auto Att or Transfer from VMS, or Transfer from Direct Extension Dial if a
call is returning to your extension after an unsuccessful transfer by an auto
attendant, a voice messaging system or the Direct Dial Extension feature,
respectively.
■ Caller ID number (or name) of calling party, if applicable
■ Coverage Call for XX on the display of users receiving a coverage
call (XX represents the number of the extension that activated call
coverage)
■ Forward xx xx on the display of users forwarding their calls (the first xx
represents the number of the user’s extension; the second xx represents
the number of the destination extension).
■ Wake Up Call on the display of users receiving a wake up call.
■
Volume or display contrast level bars, as volume or display contrast is
adjusted
■ Programming messages and prompts when in programming mode
■ When you are in Telephone Programming mode, the current line
assignment, feature code, or Speed Dial number (if any) assigned to a
button displays when the button is pressed.
Blank displays if nothing is
programmed.
■
At idle extensions 10 and 11 only, specific messages appear on the top line
of the display instead of the usual day/date message in the following
circumstances. Users at these two extensions should be instructed to notify
the System Manager when such a message appears.