Valid entries, Programming – Polycom TransTalk 9000-Series User Manual
Page 235
Advertising
Doorphone Extension (#604 and #605)
5-125
Valid Entries
Any extensions except 10, 11, or the first two extensions of any 206 or 308EC
modules.
None Assigned
✔
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s
and
e
on system phones.)
To program a doorphone extension:
1. Press
f 0 0 s s # 6 0 4
for
doorphone 1 (or
# 6 0 5
for doorphone 2) at extension 10 or 11
.
2. Enter the doorphone extension number. For example, to identify extension
20 as a doorphone extension, press
2 0
—or press
r
to unassign
an existing doorphone extension.
3. Select another procedure or exit programming mode.
Advertising