Polycom TransTalk 9000-Series - Manual (Page 277)

Last Number Redial (F05)
5-167
Last Number Redial (F05)
Description
This feature redials the last outside number dialed (maximum 28 digits). It is
useful for
immediately redialing a busy number.
Related Features
■
You can use Save Number Redial (F04) to temporarily save the last
number dialed. The difference between Last Number Redial and Save
Number Redial is that Save Number Redial allows you to make other
outside calls before redialing the saved number.
■ System Speed Dial Numbers cannot be redialed with this feature.
■ A Last Number Redial number can begin with a star code; the system
automatically inserts a delay based on the Star Code Dial Delay (#410)
setting.
■
A number dialed automatically using the Caller ID Call Logging and
Dialing feature can be redialed with this feature.
■ This feature interrupts Call Screening (F25).
Considerations
■
This feature redials all digits dialed on the last outside call except account
codes.
■
You can program a Last Number Redial button on a system phone to redial
a number with one touch.
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a Last Number Redial button:
1. Press f 0 0 s s c at extension
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press f 0 5 .
5. Program another button for this extension or exit programming mode.