Polycom TransTalk 9000-Series - Manual (Page 318)

Feature Reference
5-208
Using
To change an extension’s Outgoing Call Restriction setting:
1. Press the Outgoing Call Restriction button at extension 10.
The green light next to the Outgoing Call Restriction button turns on and
extension 10 appears busy to the system.
2. Press the Auto Dial button for the desired extension repeatedly until its
lights show the correct setting as follows:
■
No Restriction. The green light next to the Auto Dial button is on
steady.
■ Inside Only. The red light next to the Auto Dial button is on steady.
■
Local Only. The green light next to the Auto Dial button flashes.
3. Press the Outgoing Call Restriction button at extension 10 or lift the
handset and replace it back in the cradle.
The green light next to the Outgoing Call Restriction button goes off and
extension 10 resumes normal operation.