Polycom TransTalk 9000-Series - Manual (Page 319)

Outside Conference Denial (#109)
5-209
Outside Conference Denial (#109)
Description
This System Programming procedure determines whether users can include more
than one outside party in a conference call.
Related Features
■
For instructions on making conference calls, see Conference Calls.
■ Use Conference Drop to drop the last outside party added to the
conference.
Considerations
■ This feature setting applies to all system users.
■ A conference call connects up to five parties (including the conference
originator). If outside conference is allowed, you can have up to two outside
parties and up to three inside parties. If outside conference is disallowed,
you can have one outside party and up to four inside parties.
Valid Entries
1 = Allow conference calls with up to two outside parties
✔
2 = Disallow conference calls with two outside parties
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.))
To allow or disallow conferences with two outside parties:
1. Press f 0 0 s s # 1 0 9 at extension
10 or 11.
2. To allow or disallow two outside parties on a conference call, press
D until the appropriate value displays.
3. Select another procedure or exit programming mode.