Polycom TransTalk 9000-Series - Manual (Page 351)

Simultaneous Paging (I*70)
5-241
Simultaneous Paging (I*70)
Description
This feature accesses the loudspeaker paging system, if you have one connected
to the system through the PAGE jack on the primary processor module, and all of
the idle systems phones with speakers assigned to Calling Group 1.
Related Features
■
You must use Calling Group Extensions (#502) to identify the extensions
in Calling Group 1.
■ Use Loudspeaker Paging to make announcements only over the
loudspeaker paging system.
Considerations
■
You can program a Simultaneous Paging button on a system phone to
access with one touch the loudspeaker paging system and idle system
phones with speakers in Calling Group 1.
■ If the loudspeaker paging system or Calling Group 1 is in use, a user
attempting to make an announcement hears a busy tone.
■
If someone answers a loudspeaker page from a system phone in Calling
Group 1, the page becomes an intercom call.
■
If some extensions in Calling Group 1 have standard, MLC-6, or TransTalk
9000-series phones, those extensions are not included in the simultaneous
page (because they do not have built-in speakers).
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a Simultaneous Paging button:
1. Press f 0 0 s s c at extension
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press left i * 7 0 .
5. Program another button for this extension or exit programming mode.