Polycom TransTalk 9000-Series - Manual (Page 360)

Feature Reference
5-250
Special Dialing Functions
Description
This feature lets you add special characters for System Speed Dial numbers,
Personal Speed Dial numbers, and Auto Dial numbers, as follows:
Considerations
Special characters cannot be used when dialing a number manually.
Examples
■ Pause: To call an answering machine at 555-0529, wait 4.5 seconds, then
dial
321 to retrieve messages, enter 5 5 5 0 5 2 9 h h
h 3 2 1 .
Function Button Display Description
Pause h P Inserts a 1.5-second pause in the dialing
sequence to wait for a response, such as
a dial tone or computer voice message.
Recall S R Sends a timed switchhook flash needed
to alert the system on the other end (such
as a PBX or Centrex system), and to use
some local telephone company custom
calling features (such as Call Waiting).
Use Recall only as the first entry in an
Auto Dial or Speed Dial number.
Stop ! S Stops the dialing sequence until the Auto
Dial button or Speed Dial number is used
again (for example, so the user can enter
additional digits, such as a credit card
number or password). To continue, press
the Auto Dial button or
f and the
two- or three-digit Speed Dial code. (Stop
cannot be programmed from an MLC-6 or
a TransTalk 9000-series phone, since it
has no
! button.)
Touch-Tone
Enable & T Sends touch tones over a rotary line, to
electronic equipment such as answering
machines and bank computers.