Polycom TransTalk 9000-Series - Manual (Page 382)

Feature Reference
5-272
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To change the Transfer Return Extension for a specific extension:
1. Press f 0 0 s s # 3 0 6 at extension
10 or 11.
2. Dial the number of the originating extension.
3. Dial the number of the extension to which the call should return if it is not
answered.
4. To program another extension, press n or p until the
extension number shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.