Polycom TransTalk 9000-Series - Manual (Page 384)

Feature Reference
5-274
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To change the number of times a transferred call rings before returning to the
transfer return extension:
1. Press f 0 0 s s # 1 0 5 at extension
10 or 11.
2. Enter a setting (0–9). For example, to set a Transfer Return of 5 rings,
press D until a display similar to the following appears:
Transfer Return
5 Rings
3. Select another procedure or exit programming mode.