1 ink film installation / replacement, 1 installing the ink film, Installation 17 – Panasonic KX-FC241AL User Manual
Page 19
2. Installation
17
2 Installation
Base Unit
2.1 Ink film installation /
replacement
Important:
L
Remove all blue shipping tape from the
unit before installation.
2.1.1 Installing the ink film
The included film roll is a starter ink film.
1
Open the front cover by pulling up the centre
part.
2
Release the back cover by pushing the green
button (
1).
3
Open the back cover.
4
Insert the front ink film roll by inserting its
blue gear into the left slot of the unit (
1).
Insert the rear ink film roll by inserting its
white gear into the left slot of the unit (
2).
L
The ink film is safe to touch and will not
rub off on your hands like carbon paper.
L
Make sure the blue gear (
1) and white
gear (
2) are installed as shown.
5
Turn the blue gear (
1) in the direction of the
arrow until the ink film is tight (
2).
1
1
2
1
2
FC243AL-PFQX2096ZA-en.book Page 17 Thursday, September 30, 2004 3:37 PM