1 recording your greeting message, 1 erasing your recorded greeting message, 2 pre-recorded greeting message – Panasonic KX-FC241AL User Manual

Page 59: Answering machine 57

Advertising
background image

8. Answering Machine

57

8 Answering Machine

Greeting

8.1 Recording your
greeting message

You can record your own greeting message for
TAM/FAX mode, for a maximum of 16 (default) or
60 seconds in length. We recommend you
record a message of less than 12 seconds to
make it easier to receive faxes.

1

Press and hold {GREETING} until the unit
announces you to start recording.

L

A long beep will sound.

2

Speak clearly about 20 cm away from {MIC}.

L

The display will count up the recording
time.

3

To stop recording, press {GREETING}.

L

The unit will repeat your message.

L

You can also stop recording by pressing
{

STOP}.

Note:

L

You can change the maximum TAM/FAX
greeting message recording time to 60
seconds (feature #54 on page 69).

If you change the setting to 60 seconds,
we recommend that you tell the caller in
your TAM/FAX greeting message to press
{*}{

9} before starting fax transmission.

If you change the setting from 60 seconds
to 16 seconds, your greeting message will
be deleted. The pre-recorded greeting
message will be played when a call is
received.

To check the greeting message

Press {GREETING}.

L

The unit will play the greeting message.

8.1.1 Erasing your recorded
greeting message

Press {GREETING}, and then press {ERASE}
while your greeting message is played.

Note:

L

If you erase your TAM/FAX greeting
message, the pre-recorded greeting
message will be played when a call is
received.

8.1.2 Pre-recorded greeting
message

If you do not record a greeting message, one of
two pre-recorded messages will be played when
a call is received, depending on the caller’s
recording time (page 61, or feature #10 on page
66).
To check the pre-recorded greeting, press
{

GREETING}.

When the recording time is set to

1

MINUTE”/“1 Minute” or “NO LIMIT”/“No
Limit”
, the unit will play a greeting message
asking callers to send faxes or leave
messages.

When the recording time is set to

GREETING

ONLY”/“Greeting Only”, the unit will play
a greeting message asking callers to call
again.

{

STOP}

{

GREETING}

{

ERASE}

{

MIC}

FC243AL-PFQX2096ZA-en.book Page 57 Thursday, September 30, 2004 3:37 PM

Advertising