Panasonic WV-CM1780 - Manual (Page 4)

4
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
ON
OFF
POWER STANDBY INPUT SELECT MENU – + AUDIO
Video Monitor WV-CM
2080
q w e t y u r
* The above figures represent model WV-CM2080.
q Power Button (POWER ON/OFF)
This button turns the power of the monitor on and off.
w Power Indicator
Is on when the power of the monitor is turned on, also
in standby mode.
On: Green light
Standby: Orange light
e Standby Button (STANDBY)
Pressing this button toggles the display mode on the
monitor screen as shown below.
On: Normal display
Standby (Mode 1): Low display brightness
Standby (Mode 2): No display (blackout)
r Input Selection Button (INPUT SELECT)
Selects input in the sequence shown below.
t Menu Button (MENU)
Pressing this button opens the Display Setting menu for
changing the monitor’s display settings.
Pressing this button for 5 seconds or more opens the
COMMUNICATION SETUP menu.
● Front View
AUDIO
VIDEO
OUT IN OUT
A
IN
B
IN A
IN
B
IN
OUT OUT AC IN
S-VIDEO
G
STANDBY ON
STANDBY
OFF
ON OFF
TERMINATION
FOCUS
DATA
P S · D a t a
!6 @1
!8
!5
!7
!4 !3 !1 !2 !9 @0
● Rear View
y Direction Button ( C , D )
These buttons move the cursor to the item parameters
in the Display Setting and Setup menus.
C
: Down
D : Up
u Decrement/Increment Button (AUDIO - , + )
Press these buttons to increase or decrease the audio
volume.
These buttons also select the item parameter or level in
the Display Setting and Setup menu.
!1 Focus Control (FOCUS)
This control adjusts the screen focus.
!2 Screen Control
This control is preset at the factory.
!3 Data Ports (DATA)
These ports are used to exchange control data with the
System Controller in Panasonic Security Data mode.
!4 Data Termination Selector (TERMINATION ON/OFF)
This selector is used to enable termination of the moni-
tor’s data port.
VIDEO IN A VIDEO IN B S-VIDEO IN