Panasonic KX-FPG176 - Manual (Page 43)

43
Sending Faxes
Sending the same document to pre-programmed parties
1 Insert the document FACE DOWN.
● If necessary, press + or - repeatedly to
select the desired resolution (p. 38).
2 Press ) .
Display:
3 Press + or - until the following is
displayed.
4 Press w .
● The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each item, calling each
number sequentially.
● After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report.
<BROADCAST>
SEND:PRESS SET
DIRECTORY [+ -]
<MAILBOX> H
FACE DOWN
SET
STOP
Note:
● If you select the “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
● If the document exceeds the memory
capacity (p. 96), sending will be canceled.
● If one of the items is busy or does not
answer, it will be skipped. All skipped items
will be redialed up to 2 times after all of the
other items have been called.
To cancel the broadcast setting
1. Press { while the unit displays the
following.
Display:
● The display will show the following.
2. Press w .
SEND CANCELED?
YES:SET/NO:STOP
BROADCASTING
To send to selected parties only once
You can also select the parties for each transmission.
1. Follow steps 1 and 2 above.
2. Press + or - until the following is displayed.
Display:
3. Press w to start programming the items you want
to transmit.
4. Press + or - until the desired item you want to
transmit is displayed.
Example:
5. Press w .
Example:
● To program other items, repeat steps 4 and 5
(up to 20 items).
6. Press w to start transmission to the programmed
items.
DIR=Bill [01]
SEND:PRESS SET
Bill
6543210
DIR= [00]
NAVI.[+ -] A & A SET
<ONE 1 TIME 1 BROAD>
PRESS SET