Panasonic KX-FPG176 - Manual (Page 96)

96
Specifications
Technical data about this product !
■ Base unit
Applicable lines: Public Switched Telephone Network
Document size: Max. 216 mm (8 1 ⁄
2
" ) in width / Max. 600 mm (23 5 ⁄
8
" ) in length
Effective scanning width: 208 mm (8 3 ⁄
16
" )
Effective printing width: 208 mm (8 3 ⁄
16
" )
Transmission time*: Approx. 9 s/page (Original mode)**
Scanning density: Horizontal: 8 pels/mm (203 pels/inch)
Vertical:
3.85 lines/mm (98 lines/inch) –STANDARD
7.7 lines/mm (196 lines/inch) –FINE/PHOTO
15.4 lines/mm (392 lines/inch) –SUPER FINE
Halftone level: 64-level
Scanner type: Contact Image Sensor (CIS)
Printer type: Thermal Transfer on plain paper
Data compression system: Modified Huffman (MH), Modified READ (MR), Modified Modified READ (MMR)
Modem speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating environment: 5 °C – 35 °C (41 °F – 95 °F), 20% – 80% RH (Relative Humidity)
Dimensions (H x W x D): Approx. 199 mm x 384 mm x 282 mm (7 27 ⁄
32
" x 15 1 ⁄
8
" x 11 3 ⁄
32
" )
Mass (Weight): Approx. 3.3 k g (7.3 lb.)
Power consumption: Standby: Approx. 7.6 W
Transmission: Approx. 22 W
Reception:
Approx. 43 W (When receiving a 20% black document)
Copy: Approx. 45 W (When copying a 20% black document)
Maximum: Approx. 135 W (When copying a 100% black document)
Power supply: 120 V AC, 60 Hz
Fax memory capacity: Approx. 25 pages of memory transmission
Approx. 28 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard resolution.)
Voice memory capacity***: Approx. 18 minutes of recording time including greeting messages
■ Handset
Operating environment: 5 °C – 35 °C (41 °F – 95 °F), 20% – 80% RH (Relative Humidity)
Dimensions (H
´
W
´
D): Approx. 37 mm
´
58 mm
´
237 mm (1 15 /
32
"
´
2 9 /
32
"
´
9 11 /
32
" )
Mass (Weight): Approx. 228 g (0.5 lb.)
Power supply: Ni-Cd battery (3.6 V, 850 mAh)
Frequency: 2.4015 – 2.4705 GHz (24 channels)
Security codes: 1,000,000
* * Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the other
party’s machine.
** Transmission speed is based upon the ITU-T No. 1 Test Chart and
original mode.
If the capability of the other party’s machine is inferior to your unit,
the transmission time may be longer.
*** Recording time may be reduced by the calling party’s background
noise.
ITU-T No. 1 Test Chart
Note:
● Any details given in these instructions are subject to change without
notice.
● The pictures and illustrations in these instructions may vary slightly
from the actual product.