Panasonic CF-72 - Manual (Page 33)

5 - 8
For 4. RS232C CONTROLLER REGISTER R/W TEST.
Press 4 and Enter keys. 1st serial port test (I/O address xxxH)
(Normal Message): Test done ! ! Press any key when ready._
When an error message is displayed, refer to [5.2 Error Message].
For 5. INTERNAL LOOPBACK TEST.
Press 5 and Enter keys. 1st serial port test (I/O address xxxH)
(Normal Message): Test done ! ! Press any key when ready._
When an error message is displayed, refer to [5.2 Error Message].
For 6. EXTERNAL LOOPBACK TEST.
Press 6 and Enter keys. 1st serial port test (I/O address xxxH)
Connect loopback plug. Connect the loopback plug
to the serial port.
Hit any key when ready._
(Normal Message): Test done ! ! Hit any key when ready._
When an error message is displayed, refer to [5.2 Error Message].
Loopback Plug Wiring Information
1 2 3 4
6 7 8 9
5
11) PCCARD CONTROLLER TEST.
Press 14 and Enter keys. PCCARD CONTROLLER
(Normal Message): Test done ! ! Press any key when ready._
when an error message is displayed, refer to [5.2 Error Message].
12) INFRARED COMMUNICATION PORT TEST.
Press 15 and Enter keys. 1. TEST ALL DEVICES ( DEVICES)
2. TEST AUTOMATICALLY ( DEVICES)
3. EXIT
4. CONTROLLER REGISTER R/W TEST
5. INTERNAL LOOPBACK TEST
SELECT MENU : _