Panasonic BB-GT1500C - Manual (Page 18)

Preparation
18 For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
4 Install the battery:
Press the notch of the handset cover firmly, and slide it in the direction of the
arrow (
A). Insert the battery (B), and press it down until it snaps into position
( C). Then close the handset cover (D, E).
5 Charge the battery:
Place the handset on the base unit.
L
If “Charge for 7 HRS” is displayed, wait for at most 15 minutes until
“Please read joip Terms of Use. Agree?” is displayed.
L
To fully charge the battery, place the handset on the base unit for 7 hours. For
battery information, see page 20.
6 Agree to the A Terms of Use:
To use the A IP line, read the Terms of Use for the A services on the
included leaflet or at www.joip.com then press {YES} (left soft key) while
“Please read joip Terms of Use. Agree?” is displayed.
L
To agree to the Terms of Use later, press {NO}. When you want to agree,
press {IP} and wait until the display changes from “Free calls! Plug
internet cable. www.joip.com” to “Please read joip Terms of
Use. Agree?”. Press {YES} to agree to it.
7 Check for Internet access:
Wait until the STATUS indicator on the base unit turns green.
– When the STATUS indicator on the base unit lights in green, the installation is
complete. Your A number is displayed on the handset 1 (included with your
base unit). Once you start operations with the handset, it disappears from the
display (page 30).
C
E
D
A B
Confirm the charge
indicator is on.
Model shown is BB-GT1500.
[
Please read joip
Terms of Use.
Agree?
Y E S N O
GT15xxC.book Page 18 Tuesday, July 24, 2007 7:17 PM