Panasonic BB-GT1500C - Manual (Page 57)

Programming
57 For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Setting the base unit ringer tone (BB-GT1540) f
There are 3 tones and 3 melodies.
1 Press {IP/TEL} repeatedly until the display shows the desired line (n or
m
).
L You cannot set the ringer tone for both lines at the same time.
2
{^}
3 Within 10 seconds, press {<} or {>} repeatedly to select the desired tone.
L
To stop ringing, press {STOP}.
Note:
L
k If you subscribe to a distinctive ring service, select a tone (tone 1 to 3). If you
select a melody, you cannot distinguish lines by their ringers.
GT15xxC.book Page 57 Tuesday, July 24, 2007 7:17 PM